Compactor Wacker Plate Frequently Asked Questons
The engine on the machine will not start or runs erratically, what is wrong with it?
It could be any number of reasons, which might include insufficient fuel, clogged air filter or damaged spark plug.
Why is compactor wacker plate engine speed and performance important for compaction?
Variation in engine speed and performance can have a significant effect on the exciter, which produces centrifugal force for compaction.
If a compactor wacker plate’s engine produces faster speeds than it is designed for, what may happen?
Apart from possible engine failure, bearings on the exciter may become overloaded by the increase in centrifugal force that will ultimately lead to failure of the bearings.
If a compactor wacker plate’s engine produces lower speeds than it is designed for, what may happen?
Slow travel speed and poor compactor performance may occur due to a low centrifugal force and possible engine failure.
VPM, what does this phrase mean?
VPM or Vibration Per Minute is the measurement of vibrations produced by a compactor wacker plate’s exciter.
The machine’s engine is running but there is no vibration, what is wrong?
The problem could be a worn centrifugal clutch or V-belt on the compactor wacker plate.
The compactor wacker plate exciter contains oil, how important is to have the correct amount of oil?
Failure of the machine’s exciter may arise if there is too much or too little oil within it.
Is it possible to use old fuel to run the machine’s engine?
It is advisable to always use fresh fuel. When the compactor wacker plate is not in use for considerable amount of time, it is advisable to drain the fuel tank to prevent ‘waxing’ of the fuel.
The machine pulls to one side when operating, what is wrong with it?
There could be numerous reasons for this. However, it could be simply due to warped or damaged shock mounts on the compactor wacker plate.
How may a worn base plate affect a machine?
Excess base plate wear may lead to a warped base plate. The consequential damage may also affect and damage the exciter, possibly leading to oil loss, and its securing bolts.
Whilst transporting a machine, it was accidentally dropped. Can it still be used?
For safety reasons, it would be advisable to have the compactor wacker plate inspected by a professional service dealer/repairer before use.
How long can a machine be used between service intervals?
Service intervals are dependant on make and model of the compactor wacker plate. Consult the operator’s handbook for further information or contact a professional dealer for advice.
How A Compactor Wacker Plate Works
In order to obtain a stable subsurface on disturbed ground, the compactor wacker plate is one of several specialized tools to overcome this problem. These machines come in different configurations and are manufactured by various reputable companies around the world. Some compactor wacker plates also allow further implements to be added to them to provide the operator with further ease of use.
Why Use A Compactor Wacker Plate?
The compactor wacker plate is specifically designed to work in areas where, and produce the same results as, a rolling machine that cannot be used in the same area. For example, a roller machine could be used in situations where compaction of aggregate or soil is needed on sites for dwellings and other large buildings but is however unsuitable for the compaction of materials in areas, such as paths and driveways, that may be only several square metres in size. Failure to properly compact materials may have serious implications later that could also include subsidence of building foundations and floors. Poor compaction can be easily seen in gardens, paths and driveways due to the presence of small to large areas of shallow sunken holes or unstable surfaces, which are caused by the soil or aggregate settling as it is gradually exposed to the natural elements and the force of vehicular and pedestrian traffic.
How The Machine Works
How a compactor wacker plate is fairly simple. As the machine operates, the footplate on the bottom of it is moved up and down rapidly by the machine’s exciter. The impact forces generated by the exciter and the weight of the footplate begin to tightly pack together the materials beneath it. Sometimes, water is added to the surface area to be compacted which aids better compaction and dust suppression. The type of compactor wacker plate used in respect of its weight, horsepower and applied centrifugal force and the ability of the operator will determine the amount of compaction applied to a specific material. Nevertheless, not every machine is suitable for every material to be compacted. Some materials are easier to compact than others since they break and fall apart under load from the machine and then compact into a tighter area providing less room for settlement. This can be better visualised if you imagine a bucket that is filled with loose granular soil and then you apply your fist to the top of the soil whilst applying a downward force. The soil beneath you fist begins to sink as the soil compacts into a tighter area and then becomes harder to compress as the soil structure becomes firmer and stabilises. When using a compactor wacker plate, it may take several passes over the same compaction surface area to obtain the required result. It is recommended that the machine’s instruction book be consulted first to obtain this information or if still in doubt, the manufacturer or hire company is contacted before the operator starts a specific job. However, a professional compactor wacker plate operative will have gained the necessary experience to conclude when a certain material has received appropriate compaction.
When maintained and used correctly, the compactor wacker plate is an invaluable piece of light equipment for both professionals and those individuals who are contemplating carrying out landscaping or construction works.